Password Setting - Planet FGSW-2612PVS User Manual

Table 3-11 shows the descriptions of the Advanced Switch Configuration screen Objects. Use the "Tab" key to choose
the <Edit>, and start to modify these settings. The screen of Advanced Switch Configuration in figure 3-33 appears.
Object
Broadcast Strom Filter
Collision Retry Forever
MAC Table Auto-Aging
MAC Table Hashing
Console Auto Logout Time
Web Auto Logout Time
Table 3-11 Descriptions of the Advanced Switch Configuration screen Objects
After setup is complete, press "Esc" key to return to Actions menu and use the "Tab" key to choose the <Save> for saving
the current configuration. The screen in figure 3-34 appears with message "Operation completed successfully!"

3.2.10.2 Password Setting

Press 2 on your keyboard or use the "Tab" key to move the highlight to the Password Setting and press "Enter" to access
Figure 3-33 Advanced Switch Configuration Screen
Description
If this function enable, the Switch will limitation the broadcast packets. The
available options are:
Off, 5%, 10%, 20%.
If this function is disabled, when a packet meet a collision, the switch will retry 6
times before discard the packets. Otherwise, the switch will retry until the packet
is successfully sent.
Allow user to set the aging time of the MAC address table. The available options
are Disable, 150 sec, 300 sec and 600 sec. The default is 300sec.
The available options are CRC Hash and Direct Map.
Allow user to set the Auto logout time of console interface. The available options
are Never, 5min, 10min and 20min.
Allow user to set the Auto logout time of web interface. The available options are
5min, 10min, and 20min.
Figure 3-34 Misc Configuration save successfully Screen