Pin Number; Tone/Pulse Dialling; Reset Handset Defaults - Doro 525 Manual

PIN Number

The PIN number is a four-digit code (0000 when supplied) which can be
changed to a number of your choice. It protects against unauthorised use/access
of certain functions.
1. Press
.
º
2. Press .
1
3. Enter the telephones PIN number (0000 when supplied). Press
4. Enter your new PIN number. Press
5. Enter your new PIN number again. Press
Tone/Pulse Dialling (UK only)
Select the dialling type (tone or pulse), the default setting is tone dialling. It is
unlikely that this will need to be changed however should your network require
pulse dialling follow the steps below.
1. Press
.
º
2. Press
.
*
3. The current setting will be displayed (1 ┘ 2=pulse, 2 ┘ 2=tone).
4. Select either tone or pulse by pressing the corresponding keypad digit
5. Press to confirm.
º

Reset Handset Defaults

You can reset most of the handsets functions and settings back to the original
factory defaults.
1. Press
.
º
2. Press .
9
3. Enter the telephones PIN number (0000 when supplied). Press
www.doro.com
Settings
.
º
.
º
English
.
º
- .
1 2
.
º
1