Pin Number; Tone/Pulse Dialling; Reset Handset Defaults - Doro 520 Manual

PIN Number

The PIN number is a four-digit code (0000 when supplied) which can be
changed to a number of your choice. It protects against unauthorised use/access
of certain functions.
1. Press
.
º
2. Press .
1
3. Enter the telephones PIN number (0000 when supplied). Press
4. Enter your new PIN number. Press
5. Enter your new PIN number again. Press
Tone/Pulse Dialling (UK only)
Select the dialling type (tone or pulse), the default setting is tone dialling. It is
unlikely that this will need to be changed however should your network require
pulse dialling follow the steps below.
1. Press
.
º
2. Press
.
*
3. The current setting will be displayed (1 ┘ 2=pulse, 2 ┘ 2=tone).
4. Select either tone or pulse by pressing the corresponding keypad digit
5. Press to confi rm settings.
º

Reset Handset Defaults

You can reset most of the functions and settings of the handset back to the
factory default settings.
1. Press
.
º
2. Press .
9
3. Enter the telephones PIN number (0000 when supplied). Press
www.doro.com
Settings
.
º
.
º
English
.
º
- .
1 2
.
º
15