Mute Button; Paging; Key Lock; Timer - Doro 140R Manual

English
Mute button
The microphone can be muted during a call by pressing
activate the microphone.
will be displayed for as long as this function is active.
z

Paging

Pressing the key on the base unit will activate the paging signal on the handset.
This function is used to help locate the handset or to page the person carrying
the handset. The signal will stop automatically after a while or if any
the handset is pressed. The page can also be cancelled by again pressing the key
on the base unit.
Key lock
This function locks the push buttons on the handset to prevent unintentional
usage.
1. Press and hold N until the display shows N .
2. To deactivate the key lock press and hold N again.
Calls can still be received even if the key lock is active. When the call is finished
the handset returns to locked mode.

Timer

Within approximately 10 seconds after the connection of a call, a timer will be
shown on the display. The timer helps you keep track of how long the call lasts.
Recall/Call Waiting
Access to additional network services such as "Call Waiting" can be gained
by using the recall button
press , listen for the dial tone, then press
R
require only the
services information.
In order to return to the original caller press
press .
2
If this product is connected to a business PBX system, press the recall button
followed by the extension number to transfer a call.
10
Operation
. Example: when the call waiting tones are heard,
R
button to be pressed, contact your network operator for more
R
. Press
z
. Please note that some networks
2
, listen for the dial tone, then
R
again to re-
z
button on
R
www.doro.com