Table of Contents
Advertisement
Important!
Please note when programming all references to press = to press once and then immediately
release the button.
Making a call
1. Enter the required telephone number. Mistakes can be erased using C.
2. Press
the telephone number will now be dialled.
q
3. Press
again to terminate the call.
q
Receiving a call
1. Wait for the handset to ring.
2. Press
to answer the call.
q
3. Press
again to terminate the call.
q
Please note!
The handset will start to ring on the second ring in order to detect if the call is from a stored
caller in the phone book and then use the selected ring signal (only available for caller-id
subscribers).
If the telephone cannot connect to a line, a warning tone will be heard. The problem may be
due to the batteries running low, the handset being too far from the base unit or all of the
transmission channels being engaged.
Redial button
The 5 most recently dialled numbers can easily be redialled using
1. Press
and scroll using
r
2. Press
the displayed telephone number will now be dialled.
q
Volume control
The volume can be adjusted during a call by pressing
www.doro.com
Operation
/
to the required telephone number
{
}
.
r
/
.
{
}
English
Advertisement
Table of Contents
