Table of Contents
Advertisement
English
Operation
Volume Control
The earpiece volume may be adjusted during a call using
/
.
{
}
Mute button
The microphone can be muted during a call by pressing the mute button
.
z
Press the mute button again to re-activate the microphone.
The display shows
as long as the function is active.
z
Handset Paging
Pressing
on the base unit will activate the paging signal of the handset. This
j
function is used to help locate the handset or to page the person carrying the
handset. The signal will stop automatically after a while or if the
button
L
on the handset is pressed. The page can also be cancelled by pressing
on
j
the base again.
Key lock
This function locks the push buttons on the handset to prevent unintentional
usage.
1. Press
until the display shows
.
N
PrESS19
2. Deactivate the key lock by pressing
or holding down
.
N
19
The key lock is also deactivated when the handset is being charged. Calls can
still be received, even if the key lock is active. When the call is finished, the
handset returns to locked mode.
Timer
Following the connection of a call, a timer is shown on the display. The timer
helps you keep track of how long the call lasts.
Recall
Press the recall button
followed by the extension number to transfer calls
R
when connected to a PBX (TBR only).
Access to additional network services can be gained by using the recall button
,
and
keys. Contact your network operator for more information.
R
*
#
www.doro.com
9
Advertisement
Table of Contents
