Lcd Functions - Ducati SPORTCLASSIC GT 1000 TOURING Owner's Manual

LCD functions

OFF
When the engine is switched on (key turned from OFF to
ON), the instrument panel checks all instruments (dials,
display, warning lights), see (fig. 5 and fig. 6).
LCD functions (1)
By pressing button (A, fig. 6) with the key turned to ON, you
can cycle between display of the trip meter and the
odometer and, if the fuel level warning light is on, the fuel
reserve trip meter (latter function).
E
Resetting the trip meter
If button (A, fig. 6) is held pressed for more than 2 seconds
while the TRIP (trip meter) is active, the display is reset
(LCD 1).
fig. 5
LCD functions (2)
If button (B, fig. 6) is pressed with the ignition key at ON,
CHECK
the display shows the clock and the oil temperature.
Setting the clock
Press (B, fig. 6) for at least 2 seconds and the time will be
shown in display (2, fig. 6).
Select AM/PM by pressing button (A, fig. 6). Press button
(B, fig. 6) to select the hour setting function. Press (A)
repeatedly to change the hour indication. Press button (B)
to change to the minute setting function. Press button (A)
to increase the minutes; hold the button pressed for
more than 5 seconds to increase the rate of change.
Press button (B) to exit the clock setting function.
2
1 A B
fig. 6
13