Electrical Connection - Electrolux EHGC93CI User Manual

Electrical connection (220-240 Volts)
Appliances are supplied with a standard 7.5 Amp
service cord terminated by a 3-pin plug for connection
to a standard household socket. The electrical supply is
required to power the electronic ignition system.
NOTE! It will be necessary for servicing purposes to
disconnect the electrical power supply. The power
point should therefore be accessible after the appliance
is installed, as specified in the local wiring regulations.
Diagram 1 below is a schematic of the wiring in the
appliance.
Diagram 1
TO BURNER
SPARK PLUG
BODY
220-240V
IGNITION BOX
KNOB
IGNITION
SWITCHES
TO BURNER
THERMOCOUPLE
BODY
TO BURNER
SPARK PLUG
L N
220-240V
IGNITION BOX
KNOB IGNITION SWITCH
TO BURNER
THERMOCOUPLE
THERMOCOUPLE
COIL
WEIGHT of the unit is printed on the appliance
packaging label.
Use of hose assemblies
Ensure that the hose assembly is restrained from accidental
contact with the flue outlet of an underbench oven or any
other hot surface of an adjacent appliance.
L N
N
THERMOCOUPLE
COILS
N
E
N N Sw L L Sw
1400W
INDUCTION
MODULE
220-240V
T-ZERO MODULE
E
electrolux gas cooktops electrical connection 12
DANGER
220-240V VOLTS AC
DISCONNECT FROM SUPPLY
BEFORE REMOVING PANEL
N L E
BODY
N Sw L L Sw
220-240V
T-ZERO MODULE
E
DANGER
220-240V VOLTS AC
DISCONNECT FROM SUPPLY
BEFORE REMOVING PANEL
E N L 15A
L N L
L L
E
N N
EMC
POWER
FILTER
N L
BODY
E
2200W
INDUCTION
MODULE