Oven Back Wall; For Ease Of Cleaning - Bosch HCE744350R Instruction Manual

Oven back wall

Important notes
For ease of
cleaning
Switching on the oven light
The back wall in the oven cleans itself. It is coated
with a highly porous ceramic layer. This coating
absorbs and dispels splashes from baking and
roasting while the oven is in operation. You will obtain
a better result, the higher the temperature and the
longer the oven is in operation.
If splashes are still visible even after repeated use,
proceed as follows:
First clean the enamel surfaces in the oven. Then
select 3D hot air < or top and bottom heating t.
Heat up the empty oven for approximately 2 hours at
maximum temperature.
The ceramic coating is regenerated. Brownish or
whitish residues can be removed with water and a
soft sponge.
Light discolouration of the coating does not affect
automatic self cleaning.
Never use abrasive detergent. You will scratch or
destroy the highly porous coating.
Never clean the rear panel with oven cleaner.
If oven cleaner accidentally gets onto the rear panel,
remove it immediately with a sponge and plenty of
water.
For ease of cleaning, you can switch on the oven light
and detach the oven door.
Set the function selector to t.
33