Installation
38
1. Insert the bottom panel diagonally towards the
back. (Fig. A)
2. Place the small clips on the right and left side of
the bottom panel.
3. Insert the centre panel. (Fig. B)
A
4. Fit the small clips to the lower panel. (Fig. C)
5. Attach the large clips on the right and left and
screw tight. (Fig. C)
c
6. Insert the uppermost panel diagonally towards the
back. The smooth surface must face outwards.
7. Replace the cover and screw in place.
8. Attach the oven door.
Do not use the oven again until the panels have
been correctly fitted.
B