Setting The Hob; Setting Procedure; Large Dual Circuit Hotplate And Extended Cooking Zone - Bosch HCE744350R Instruction Manual

Setting the hob

Setting procedure

Large dual circuit
hotplate and
extended cooking
zone
Switching on the large area
Switching back to the small
area
In this section, you can find out how to set your
hotplates. The table shows heat settings and cooking
times for various meals.
Adjust the heat setting of the individual hotplates
using the hotplate controls.
Position 0 = off
Position 1 = lowest power
Position 9 = highest power.
When you switch on a hotplate, the indicator lamp
lights up.
The size of these hotplates can be altered.
Turn the hotplate control to position 9 where you will
feel a slight resistance then continue turning to
symbol
ð
= large dual circuit hotplate or
æ
= extended cooking zone
Then immediately turn it back to the desired heat
setting.
Turn the hotplate control to 0 and reset.
N.B.: Never turn the hotplate control beyond the ð or
æ symbols to 0.
The small dual circuit hotplate is particularly good for
heating small amounts.
23