BOXLIGHT PRO80S3 User Manual page 5

1.7 Ambient Light Compensation
Commands have been included to utilize Texas Instruments' Dgamma table selection. There are three Entertainment
Experience dgamma tables provided to compensate for low, medium and high ambient room light levels. For low light
levels use dgamma table 5. For medium light levels use dgamma table 9/10. For high light levels user dgamma table 14.
See the command GAMMA for more details.
1.8 Lamp Module Replacement
High pressure lamp may explode if improperly handled. Refer servicing to qualified service personnel. The customer
should never attempt to disassemble the lamp or to dispose of the lamp casing other than by returning to the dealer. If the
lamp breaks, leave the area immediately and stay away for at least 30 minutes and ventilate the room so as not to inhale
the mercury vapor. If you inhale the mercury vapor, see a physician immediately and follow their instructions. Lamp
replacement is recommended after 3000 hours of use. Wait 60 minutes after turning off and unplugging the projector
power cord before performing the lamp replacement.
BOXLIGHT PRO80S3 Projector Preliminary User's Manual
Page 5 of 33