BOXLIGHT PRO80S3 User Manual page 22

System boot up will reload the settings, as below:
a. Gamma setting
b. P7 setting
c. MCGD & TCGD
d. Lamp mode
e. Brightness & Contrast
f. Image Orientation
→
Syntax: ON
→
OFF
→
ONS
→
OND
> on
Power On – Dual_Lamp
Lamp1 S/N = feng1
Lamp1 Time = 9:21
Lamp1 Strikes = 45
Lamp1 is Off !
Lamp2 S/N = feng2
Lamp2 Time = 9:43
Lamp2 Strikes = 74
Lamp2 is Off !
>
Powering Up
> ond
Power On -Dual_Lamp
Lamp1 S/N = feng1
Lamp1 Time = 3:15
Lamp1 Strikes = 35
Lamp1 is Off !
Lamp2 S/N = feng2
Lamp2 Time = 3:37
Lamp2 Strikes = 64
Lamp2 is Off !
>
Powering Up
> ons
Power On -Signal_Lamp Lamp 1
Lamp1 S/N = feng1
Lamp1 Time = 9:23
Lamp1 Strikes = 46
Lamp1 is Off !
Lamp2 S/N = feng2
Lamp2 Time = 9:45
Lamp2 Strikes = 75
Lamp2 is Off !
>
Powering Up
BOXLIGHT PRO80S3 Projector Preliminary User's Manual
Main Power On and Turn On lamp which last power off select lamp mode. If lamp mode is Single
lamp mode, then turn on the lamp which lifetime is small, then the other one.
Main Power Off.
Main Power On and Turn On Single lamp mode which lifetime is small, then the other one.
Main Power On and Turn On Dual lamp.
Page 22 of 33