BOXLIGHT PRO80S3 User Manual page 21

LAMPON1
LAMPON2
LAMPOFF1
LAMPOFF2
Turn ON/OFF the lamp, when system is powered on. LAMPON1 is turn lamp 1 on; LAMPOFF1 is turn lamp1 off.
LAMPON2 is turn lamp 2 on; LAMPOFF2 is turn lamp2 off. In dual-lamp mode, user turn off one lamp, the system will
switch to single lamp mode, and store the mode to EEPROM.
Syntax: LAMPON1
LAMPOFF1
LAMPON2
LAMPOFF2
> lampoff1
LAMP1 OFF !
> lampoff2
LAMP2 OFF !
> lampon1
LAMP1 ON !
> lampon2
LAMP2 ON !
M+, M-
Syntax: m+
m-
> m+
Monitor Info. On !!
> m-
Monitor Info. Off !!
ON, OFF, ONS, OND
Power sequencing commands. See section 1.3 for more details.
Command
ON
ONS
OND
OFF
BOXLIGHT PRO80S3 Projector Preliminary User's Manual
LAMP On/Off
Informational Message Reporting Control
POWER Control
ON and OFF Power Sequencing Commands
Current State
STANDBY [RED]
POWER ON [GREEN]
5 MINUTE POWER DOWN [YELLOW]
60 SECOND POWER OFF [YELLOW]
STANDBY [RED]
POWER ON [GREEN]
5 MINUTE POWER DOWN [YELLOW]
60 SECOND POWER OFF [YELLOW]
LAMPON1
LAMPON2
LAMPOFF1
LAMPOFF2
ON, OFF, ONS, OND
Resulting State
POWER ON
NO CHANGE
POWER ON – Power Down Cancelled
POWER ON – Lamp re-strike after 90 second
lamp cool-down
NO CHANGE
5 MINUTE POWER DOWN – Shutter closed
60 SECOND POWER OFF – Lamp OFF,
Shutter closed
NO CHANGE
M+, M-
Page 21 of 33