Table of Contents
Advertisement
Check Before Use
To ensure the best operation of the phone and Dock, upgrade to the latest
firmware revisions in both products
Upgrade Firmware
1.
Ensure that the PotsDOCK Extreme is running with the latest
firmware which can be located at:
www.beamcommunications.com/support/iridium
2.
Ensure that the Iridium Extreme Handset is running with the
required compatible firmware which can be located at:
www.beamcommunications.com/support/iridium
Operation of the PotsDOCK Extreme
Starting Up
1.
Retract the antenna into the Extreme handset.
2.
Place the Extreme handset into the PotsDOCK Extreme as per
instructions "Docking & Undocking" on page 30 & 31.
3.
If using the yellow accessory input wire, switch the vehicle ignition
to ACC or ON position. The PotsDOCK Extreme will automatically
power up followed by a single beep. The Extreme handset will then
start to initialise. The PotsDOCK Extreme will sound a rising double
(2) beep.
4.
Wait for the Extreme handset to register on the Iridium network.
5.
Wait for the Status LED on the Dock to be solid GREEN.
6.
You are now ready to make and receive calls.
32
Hide quick links:
Advertisement
Table of Contents
