ing the original flight plan until cleared for the
approach—but, keeps the approach available
for quick activation when needed.
5.
For approaches not approved for GPS, a
reminder window will appear indicating that
GPS guidance on such approaches is strictly
for monitoring only. To confirm this reminder,
highlight "Yes?" and press ENT.
Select Arrival
Select Arrival? allows you to select a published
standard terminal arrival route (STAR) for the destina-
tion airport, or replace the current arrival with a new
selection.
To select an arrival for a direct-to or flight plan
destination airport:
1.
Select the "Select Arrival?" option from the
active flight plan page options and press
ENT.
2.
A window will appear listing the available
transitions for your destination airport. Turn
the small right knob to highlight the desired
transition waypoint and press ENT.
Active Flight Plan Options
3.
A second window will appear listing available
runways for the transition. Turn the small
right knob to highlight the desired runway
and press ENT.
With "Load?" highlighted, press ENT.
4.
Select Departure
Select Departure? allows you to select a pub-
lished standard instrument departure (SID) for the
departure airport, or replace the current departure
with a new selection. When using a direct-to, the
400W-series will use the nearest airport as a reference
when displaying available departures. See Sec 5 - Pro-
cedures for information on selecting departures using
the PROC key.
To select a departure for the departure airport:
1.
Select the "Select Departure?" option from
the active flight plan page options and press
ENT.
2.
A window will appear listing the available
departures for your departure airport. Turn
the small right knob to select the desired
departure and press ENT.
3.
A second window will appear listing available
transitions for the departure. Turn the small
right knob to highlight the desired transition
waypoint and press ENT.
With "Load?" highlighted, press ENT.
4.
4 - FLIGHT PLANS
75