9 - AUX PAGES
Setup 1
To change the ILS CDI selection:
1.
Select "CDI / Alarms" from the setup 1 page.
2.
Turn the large right knob to highlight the
"Auto"/"Manual" ILS CDI field.
Turn the small right knob to select "Auto" or
3.
"Manual", as desired. Press ENT to accept the
selection.
NOTE: Installations with certain autopilots, such
as the KAP 140 and KFC225) do not allow auto-
matic ILS CDI switching.
To set the arrival alarm and alarm distance:
1.
Select "CDI / Alarms" from the setup 1 page.
2.
Turn the large right knob to highlight the
"On"/"Off" field (directly below "Arrival
Alarm").
Turn the small right knob to select "On" or
3.
"Off", as desired. Press ENT to accept the
selection.
4.
The flashing cursor moves to the alarm dis-
tance field (to the immediate right of "On" or
"Off"). To enter an arrival alarm distance, use
the small and large right knobs to enter
the desired alarm distance. Press ENT when
finished.
168
Units / Mag Var
To set the magnetic variation:
1.
Select "Units / Mag Var" from the Setup 1
page.
2.
The flashing cursor highlights the heading
mode field.Turn the small right knob to select
the desired heading mode: Auto or True. Press
ENT to accept the selection.