Flight Timers - Garmin GPS 400W,GNC 420W Pilot's Manual & Reference

Panel-mounted ifr navigation/communication system
Hide thumbs Also See for GPS 400W,GNC 420W:
Table of Contents

Advertisement

Flight Timers

To view, use or reset the generic timer:
1.
Select "Flight Timers" from the utility page.
2.
The flashing cursor highlights "Start?".To start
the generic timer, press ENT. (You will typically
begin with this step for count up timers. How-
ever, for count down timers, you may wish to
enter a count direction and time before starting
the timer. )
3.
To change the count direction, turn the large
right knob to highlight count direction field:
"Down" or "Up". Turn the small right knob
to select the desired count direction. Press ENT
when finished.
4.
For a count down timer, turn the large right
knob to highlight the time field. Use the small
and large right knobs to enter the count
down time—in hours, minutes and seconds.
Press ENT when finished.
5.
To stop the generic timer, turn the large right
knob to highlight "Stop?" and press ENT.
To reset the generic timer, turn the large right
6.
knob to highlight the time field. Press CLR,
followed by ENT.
To record or reset the departure time:
1.
Select "Flight Timers" from the utility page.
Turn the large right knob to highlight the
2.
reset mode field, under "Departure Time".
(The reset mode field will indicate "Pwr-on"
or "GS>30kt".)
Turn the small right knob to select the desired
3.
reset mode. ("Pwr-on" will record a departure
time when the 400W-series unit is turned on.
"GS>30kt" will record a departure time once
the GPS-computed ground speed exceeds 30
knots.)
Press ENT when finished.
4.
To reset the departure time, turn the large
5.
right knob to highlight "Reset?" and press
ENT.
To view, use or reset total trip time:
1.
Select "Flight Timers" from the utility page.
Turn the large right knob to highlight the
2.
reset mode field, under "Total Trip Time".
(The reset mode field will indicate "Pwr-on"
or "GS>30kt".)
Turn the small right knob to select the desired
3.
reset mode. ("Pwr-on" will record trip time, in
hours/minutes/seconds, any time the 400W-
series unit is turned on. "GS>30kt" will record
trip time any time the GPS-computed ground
speed exceeds 30 knots.)
4.
Press ENT when finished.
9 - AUX PAGES
Utility Page
161

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

400w seriesGnc 420w

Table of Contents