Wpt Pages - Garmin GPS 400W,GNC 420W Pilot's Manual & Reference

Section 6

WPT Pages

WPT Page Group
The Waypoint (WPT) page group provides infor-
mation about the thousands of airports, VORs, NDBs,
intersections, runways, frequencies, and procedures
stored on your Jeppesen NavData
is also provided to display information for up to 1,000
user-created waypoints.
NAV
7+ available pages
(see Section 2)
Airport Location
Airport
Intersection
NOTE: Please note that your 400W-series uses ICAO identifiers for all airports. All U.S. airport identifiers which
contain only letters use the prefix "K". For example, Los Angeles International is KLAX under the ICAO standard.
Other airports, such as Otten Memorial (3VS), that contain numbers in the identifier, do not require the "K" prefix.
Many foreign countries use two letter prefixes.
card. A WPT page
®
WPT
10 available pages
(see list below)
Runway Airport Frequency
NDB
To quickly select a WPT page:
1. From any page, press and hold CLR to select
the default NAV page. (You may skip this step
if you are already viewing any of the main
pages.)
2. Turn the large right knob to select the WPT
page group. "WPT" will appear in the lower
right corner of the screen.
Turn the small right knob to select the desired
3.
WPT page.
AUX
4 available pages
(see Section 9)
Approach Arrival
Airport Airport
VOR Waypoint
User
6 - WPT PAGES
WPT Page Group
NRST
8 available pages
(see Section 7)
Departure
Airport
113