Software / Database Versions; Setup 1 Page - Garmin GPS 400W,GNC 420W Pilot's Manual & Reference

9 - AUX PAGES
Utility Page

Software / Database Versions

The software, database, and terrain database ver-
sion pages display software version information for
each of the various subsystems contained within the
400W-series unit, as well as database versions for the
Jeppesen NavData ® card and built-in land data. These
pages are for information purposes only—no user
functions are available from this page. Reach these
pages by turning the small or large right knobs and
then press ENT. Press CLR or the small right knob
to return to the utility page.
164

Setup 1 Page

The Setup 1 page provides access to airspace
alarms, CDI scale adjustment, an arrival alarm, units
of measure settings, position formats, map datums and
settings for local or UTC time display. When a setup
item is selected, the corresponding page will appear
providing access to the various unit settings.
To select, highlight
with cursor and press
ENT.