Waypoint memory is full — You have used all 1000 user
waypoint locations in the 400W-series unit memory. Delete
unwanted waypoints to make room for new entries.
Turn Advisory and Arrival Annunciations
The following annunciator messages may appear in the
lower right corner of the 400W-series unit display:
ARRIVING WPT — Arriving at the destination waypoint
for the active leg (waypoint alert).
DTK xxx° xx S — Waypoint alert. Prepare to turn to the
indicated heading upon waypoint passage.
HOLD DIRECT — "Direct" holding pattern entry.
HOLD PARALLEL — "Parallel" holding pattern entry.
HOLD TEARDROP — "Teardrop" holding pattern entry.
LT TO xxx° xx S — Turn advisory. Turn to the indicated
heading by the time shown.
LT TO xxx° NOW — Turn advisory. Turn to the indicated
heading now.
PTK END xx S — Parallel Offset is terminating by the
time shown.
RT TO xxx° xx S — Turn advisory. Turn to the indicated
heading by the time shown.
RT TO xxx° NOW — Turn advisory. Turn to the indicated
heading now.
11 - MESSAGES
ABBREVIATIONS &
NAV TERMS
183