Section 6 Wpt - Garmin GPS 400W,GNC 420W Pilot's Manual & Reference

6 - WPT PAGES
Identifier, Facility, Location or City
The WPT page group includes ten pages. While
viewing any WPT page, turn the small right knob
to select a different WPT page. The first six pages
provide detailed information for the selected airport:
location, runways, frequencies, approaches, arrivals,
and departures. The last four pages provide informa-
tion for intersections, NDBs, VORs and user-created
waypoints.
After a WPT page is selected, information for a
waypoint may be viewed by entering the identifier (or
name) of the desired waypoint. Airports, NDBs and
VORs may be selected by identifier, facility name or
location (city).
To enter a waypoint identifier:
1. Select the desired WPT page and press the
small right knob to activate the cursor.
Turn the small right knob to select the first
2.
character of the waypoint's identifier.
3. Turn the large right knob to select the next
character field.
Turn the small right knob to select the desired
4.
character.
5. Repeat steps 3 and 4 until the identifier is
selected, then press ENT.
To remove the flashing cursor, press the small
6.
right knob.
114
To enter a waypoint facility name or city location:
1. Select the airport location page, NDB page or
VOR page from the WPT page group.
Press the small right knob to activate the
2.
cursor.
3. Turn the large right knob to select the facility
name or location (city) field.
Turn the small right knob to select the desired
4.
character.
Turn the large right knob to select the next
5.
character field.
6. Repeat steps 4 and 5 until the facility name or
location is selected, then press ENT.
To remove the flashing cursor, press the small
7.
right knob.