Airport Approach Page - Garmin GPS 400W,GNC 420W Pilot's Manual & Reference

Panel-mounted ifr navigation/communication system
Hide thumbs Also See for GPS 400W,GNC 420W:
Table of Contents

Advertisement

6 - WPT PAGES
Airport Approaches
Airport Frequency Page Options
Select Next FPL Apt?
As described earlier in this section.
Select Destination Apt?
As described earlier in this section.

Airport Approach Page

WAAS
Identifier, Symbol
approach
and Type
ID
Fourth Page in
Map Image
WPT Group
The airport approach page shows the available
approach procedures for the selected airport. Where
multiple initial approach fixes (IAFs) and feeder routes
are available, that information may also be displayed.
A map image provides a layout diagram for each
approach and transition.
If a WAAS approach has been selected, the WAAS
approach ID is displayed in the top left corner of the
map. The approach service level is shown in the lower
right corner of the map. Service level annunciations
available are: LPV, L/VNAV, LNAV+V, or LNAV.
To scroll through the available approaches and
transitions:
Press the small right knob to activate the
1.
cursor.
120
Approach
Procedure Name
Transitions: IAFs,
Feeder Routes and
Vectors-to-Final
WAAS service level
2.
Turn the large right knob to place the cursor
on the approach (APR) procedure name field.
3.
Turn the small right knob to display a window
of available approaches for the selected airport.
Continue turning the small right knob to
select the desired approach.
Press ENT.The cursor moves to the transitions
4.
(TRANS) field.
5.
Turn the small right knob to display a window
of available transitions. Continue turning
the small right knob to select the desired
transition or select "VECTORS" for guidance
only along the final course segment of the
approach.
6.
Press ENT.To remove the flashing cursor, press
the small right knob.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

400w seriesGnc 420w

Table of Contents