Rear Shock Absorber Adjustment - Yamaha Fazer Service Manual

REAR SHOCK ABSORBER ADJUSTMENT

¿
ç
ææææææææææææææææææææææææææææææææææ
Adjustment steps:
• Turn the Adjuster Ring ¿ in or out.
è
Turning toward ç Ÿ
Turning toward è Ÿ
Adjustment numbers:
CAUTION:
WARNING
• Never turn the Adjuster beyond the maxi-
mum or minimum setting.
• Always adjust each Shock Absorber to the
same setting.
ææææææææææææææææææææææææææææææææææ
TYRE INSPECTION
1. Measure :
WARNING
• Tyre inflation pressure should only be
checked and adjusted when the Tyre tem-
perature equals the ambient air tempera-
ture. Tyre inflation pressure and suspen-
sion must be adjusted according to the
cargo, rider, pasenger and accessories
(fairing, saddlebags, etc. if approved for
this model), and according to whether the
Motorcycle will be operated at high speed
or not.
NEVER OVERLOAD THE MOTORCYCLE.
• Operation of an overloaded Motorcycle
could cause tyre damage, accident or injury.
3-25
INSP
ADJ
Spring preload is
increased.
Spring preload is
decreased.
Standard 2
Minimum 1
Maximum 5
• Tyre inflation pressure
Out of specification Ÿ Adjust.