Kick Starter - Yamaha Fazer Service Manual

ENGINE INSPECTION AND REPAIR
À
Á
À
5. Measure :
• Axle runout (Main and Drive)
Use a centering device and a dial gauge ¿
Out of specifications Ÿ Replace the bent
Axle
6. Inspect :
• Gear teeth
Blue discoloration/pitting/wear Ÿ Replace
• Mated Dogs
Rounded edges/cracks/missing portions Ÿ
Replace
7. Inspect :
• Shift Shaft ¿
¿
Damage/bent/wear Ÿ Replace
• Return spring (shift shaft) À
• Return Spring (stopper lever) Á
Wear/damage Ÿ Replace
KICK STARTER INSPECTION
1. Inspect :
• Gear teeth (kick Gear) ¿
• Gear teeth (Idle Gear) À
Wear/damage Ÿ Replace
¿
2. Measure :
• Torsion spring ¿ force Using a Spring
Gauge
Out of specification Ÿ Replace
Kick Clip friction force :
4-29
ENG
Runout : 0.01 mm
<limit> : 0.03 mm
0.8 ~ 1.2 kg