Installation - Yamaha Fazer Service Manual

SIDE COVERS, SEAT AND FUEL TANK
¿
¿
ç
è
¿
Á

INSTALLATION

Reverse the REMOVAL procedure.
Â
Note the following points.
Á
1. Install
À
NOTE :
• Keep the projection on plate Á downward.
2. Install
3. Install
NOTE :
• Insert the projection ç on the rear of the seat
into the respectable è on the Chassis, then
push down front of the seat and tighten the
bolts.
4. Install
5. Install
À
6. Tighten
3-5
INSP
ADJ
• Fuel Tank ¿
• Damper Rubber À
• Plate Á
• Bolt Â
• Fuel Hose
Bolt (fuel tank)
20 Nm (2.0 mkg; 14.4 ft.lb)
• Scoop Bracket ¿
• Bolts - 2 Nos.
• Seat
• Bolts - 2 Nos.
Bolt (Seat)
3.8 Nm (0.38 mkg, 3.0 ft.lb)
• Side Cover (LH) ¿ and lock with Key
• Side Cover (RH) À
• Screw Á