Headlight Beam Adjustment; Headlight Bulb Replacement - Yamaha Fazer Service Manual

HEADLIGHT BEAM ADJUSTMENT/

HEADLIGHT BULB REPLACEMENT

HEADLIGHT BEAM ADJUSTMENT
À
¿
NOTE :
Punch Mark is given on the Adjuster Bracket for
reference to tighten the Bolt ¿.
HEADLIGHT BULB REPLACEMENT
NOTE :
Unhook the Bulb spring.
Keep flammable products and your hands
away from the Bulb while it is on, it will be
hot. Do not touch the bulb unit until it cools
down.
Avoid touching glass part of bulb. Also keep
it away from oil otherwise, transparency of
glass, bulb life and brightness will be ad-
versely affected. If oil gets on bulb, clean it
with a cloth moistened thoroughly with al-
cohol or lacquer thinner.
3-31
1. Loosen:
• Bolt ¿
2. Loosen:
• Screw À - 2 Nos.
3. Adjust :
• Headlight beam (vertical)
Push down Ÿ Headlight beam moves
lower.
Pull up Ÿ Headlight beam moves higher.
1. Remove:
• Headlight Assy.
2. Disconnect :
• Headlight beam leads from both bulbs.
• Bulb cover
3. Remove :
• Bulbs - 2 Nos.
WARNING
4. Install:
• Bulb (new)
Secure the new Bulb with the Bulb spring.
CAUTION:
WARNING
INSP
ADJ