¿
À
¿
¿
Á
ENGINE DISASSEMBLY
CDI MAGNETO REMOVAL
1. Remove :
• Nut (magneto)
• Plain washer
NOTE :
• Loosen the Nut Magneto while holding the
Magneto À with Magneto Holder ¿
2. Attach
• Bush
• Magneto Puller ¿
NOTE :
• Place the Bush on the Crankshaft threaded
end before using the Magneto Puller to avoid
thread damage.
3. Remove :
• CDI magneto ¿ using magneto puller À
À
• Key wood-ruff
4. Remove
À
• Bolt ¿
• Guide Stopper# 2 À
¿
• Bush
• Timing chain Á
5. Remove :
• Torx Screw ¿ (Segment) using Torx Bit.
¿
WARNING
Never use Phillips screw driver
4-10
ENG
Magneto Holder :
YSST - 627
Magneto Puller :
YSST - 628
Torx Bit :
YSST - 611