Clutch - Yamaha Fazer Service Manual

À
¿
À
ENGINE DISASSEMBLY

CLUTCH

NOTE :
Á
The Clutch Assembly can be removed while the
Engine is mounted on the Motorcycle by remov-
ing the following parts and draining the Engine
oil:
• Kick Starter.
Á
1. Remove :
NOTE :
¿
• Hold Kick Crank Assy. at extreme down posi-
• Loosen the Bolts of Crankcase Cover #2 (RH)
2. Remove :
3. Remove:
NOTE :
Loosen the Pressure Plate Bolts in a crisscross
pattern.
4. Remove :
5. Loosen :
NOTE :
¿
Loosen the Clutch Boss Nut ¿ while holding the
À
Clutch Boss À with the Clutch Holder.
4-7
• Nut kick Crank assy ¿.
• Kick Crank Assy À.
• Bolts Crankcase Cover-2 (R.H.) Á - 9 nos
• Crankcase Cover (RH)
tion for opening the Nut Kick Crank Assy.
in a crisscross pattern.
• Gasket ¿
• Dowel pins À - 2 Nos
• Pressure Plate Bolts ¿ - 4 Nos
• Clutch Springs À - 4 Nos
• Pressure Plate Á with Push rod 1
• Friction Plates  - 5 Nos
• Clutch Plates à - 4 Nos
• Ball Ä
• Straighten the Lock Washer tab.
• Nut (clutch boss) ¿
Clutch Hub Holder
YSST - 233
ENG