Setting Up And Using The Scanner; Positioning The Base Station; Changing The Base Station Position - HP Wireless Barcode Scanner User Manual

4

Setting Up and Using the Scanner

Follow the steps below to connect and get the scanner up and communicating with its host.
1. Configure the Base Station starting on this page.
2. Charge the Batteries (refer to
3. Link to the Base Station (refer to
4. Select the Interface Type (refer to
5. Configure the scanner as described in
depends on settings needed).

Positioning the Base Station

The base station/charger may be set up in desk application to hold the reader in two different
positions, either a horizontal or standing position, in order to provide the most comfortable use
depending on needs.
Figure 4-1

Changing the Base Station Position

The base station is configured by installing one of two sets of mechanical parts that come with the
cordless kit. The default mounts provide three options: vertical (wall) mounting, standing (45°), or
horizontal mounting with a higher mechanical retention of the scanner. Use the other mounts only for
horizontal mounting, with lower retention of the scanner. The different parts may be interchanged to
customize retention preferences.
Positioning the Base Station
Charging the Batteries on page
Linking the Reader on page
Selecting the Interface Type on page
Programming the Scanner on page 21
13).
18).
19).
(optional,
Positioning the Base Station 9