HP 4430 Manuals

Table of Contents

• • 3

    Table of Contents

• 5

  Before You Start

  • 5

    Introduction
  • 5

    HP Storeonce G3 Models
    • 6

      Converting from G2 Models
  • 6

    Software and Hardware Requirements
    • 6

      Supported Ethernet Configurations
    • 7

      Supported Fibre Channel Connections
    • 7

      Software Requirements
  • 7

    Recommended Web Browser Settings
  • 7

    Storeonce CD Contents

• 9

  Installing and Cabling the HP Storeonce Backup System

  • 9

    Installing the Rail Kit
  • 9

    Mounting the HP Storeonce Backup System
  • 11

    Connecting the Hardware
    • 11

      Connecting the HP Storeonce 4400 Series Backup System
    • 12

      Connecting the HP Storeonce 4200 Series Backup System
    • 12

      Connecting the HP Storeonce 2620 Series Backup System
  • 13

    Connecting to the Capacity Upgrade Kit (Optional)

• 14

  Powering on and Managing the Storeonce Management System

  • 14

    Powering on the HP Storeonce Backup System
  • 14

    Dicovering the HP Storeonce Backup System on the Network
  • 15

    Accessing the Storeonce Management Console
    • 15

      The Storeonce CLI
    • 15

      The Storeonce GUI
  • 16

    User Accounts

• 17

  Network Configuration

  • 17

    Networking Overview
    • 17

      When Is the Default Configuration File Not Adequate
  • 18

    Network Bonding Modes
  • 18

    The Network Configuration Wizard
    • 19

      Before Running the Wizard
    • 19

      To Run the Wizard
    • 20

      Example Wizard Sequence
  • 22

    More about the Configuration File
    • 22

      Structure of the Configuration File
    • 22

      If Creating Additional Network Configuration Files
  • 22

    Default Network Configuration
  • 23

    Identifying Network Ports Available
  • 24

    Network Configuration Examples Not Using the Wizard
    • 24

      Example 1: Single Port 1Gbe Connection
    • 25

      Configuring High Availability Bonding, Mode 6, on the 1Gbe Network (All Platforms)
    • 26

      Adding a Second Network Without Bonding (Example Shows 1Gbe Network)
    • 27

      Example 3: Adding the 10Gbe Network (4400 Series Only)

• 29

  Drivers, Iscsi and FC Installation and Configuration

  • 29

    Driver Installation (Optional, VTL Only)
  • 30

    Iscsi Initiator (Optional, VTL Only)
    • 31

      Manual Iscsi Initiator Installation
    • 31

      The Iscsi Initiator and Authentication
    • 31

      The Microsoft Iscsi Initiator
  • 39

    Fibre Channel Configuration
    • 39

      Fibre Channel Connection
    • 40

      Zoning
    • 41

      Diagnostic Fibre Channel Device

• 42

  Completing the Installation

  • 42

    Setting up Time and Date
  • 42

    Configuring SNMP

• 44

  Understanding Leds

  • 44

    Front View of the HP Storeonce 4430/4420 Backup System
  • 45

    Front View of the HP Storeonce 4210/4220 Backup System
  • 45

    Front View of the HP Storeonce 2620 Backup System
  • 46

    1Gbe LAN Port Leds
  • 47

    Hot-Plug Drive Leds
  • 47

    Fibre Channel Card Leds
  • 48

    Capacity Upgrade Kit Leds

• 49

  Troubleshooting

  • 49

    Connecting to the Network
  • 49

    Connecting to the Storeonce Backup System from the Backup Application
  • 50

    Performance
  • 50

    Using the 10Gb Ports (HP Storeonce B44Xx Only)
    • 50

      Powering up Servers
    • 50

      Power off
  • 51

    Power off and Power on
    • 51

      Rebooting the System
    • 51

      Power On/Off Problems
  • 51

    Cannot Access a Storage Shelf (HP Storeonce 42Xx and 44Xx Backup Systems)
  • 51

    Cannot Connect to a NAS Share

• 53

  About this Guide

  • 53

    Intended Audience
  • 53

    Related Documentation
  • 53

    Document Conventions and Symbols
  • 54

    HP Technical Support
  • 54

    Customer Self Repair
  • 54

    Registering Your HP Storeonce Backup System
  • 54

    Subscription Service
  • 54

    HP Websites
  • 55

    Documentation Feedback

• 56

  Index