Maintenance And Troubleshooting - NordicTrack Xlt 1200 Elliptcal User Manual

MAINTENANCE AND TROUBLESHOOTING

Inspect and tighten all parts of the elliptical exerciser
regularly. Replace any worn parts immediately.
To clean the elliptical exerciser, use a damp cloth and
a small amount of mild soap. Make sure to regularly
clean the rollers and the track on which the rollers
ride. Important: To avoid damage to the console,
keep liquids away from the console and keep the
console out of direct sunlight.
PULSE SENSOR TROUBLESHOOTING
Note: If you wear the chest pulse sensor and hold
the handgrip pulse sensor at the same time, the
console will not display your heart rate accurately.
If the chest pulse sensor does not function properly, or
if the displayed heart rate appears to be too high or
too low, see CHEST PULSE SENSOR TROU-
BLESHOOTING on page 11.
If the console does not display your heart rate when
you hold the handgrip pulse sensor, or if the displayed
heart rate appears to be too high or too low, see step
6 on page 15.
HOW TO LEVEL THE ELLIPTICAL EXERCISER
If the elliptical exerciser rocks slightly on your floor
during use, see HOW TO MOVE AND LEVEL THE
ELLIPTICAL EXERCISER on page 13.
HOW TO ADJUST THE DRIVE BELT
First, remove the two M6 x 16mm Button Screws (49)
attaching the left Pedal Disc (5). Without removing the
Pedal Disc, pivot it out of the way.
Next, locate the M10 Flange Nut (95). Turn the Flange
Nut clockwise until the pedals no longer slip.
Reattach the Pedal Disc (5).
5
49
21
95