Connecting The Scanner To Your Computer Using; The Scsi Interface - Epson EXPRESSION 1640XL User Manual

Connecting the Scanner to Your Computer
using the SCSI Interface
For instructions on connecting the scanner to your computer
using the SCSI interface, read this section.
Note for Macintosh Users:
Be sure to install the scanner software before connecting the scanner to
your computer. See "Installing the Scanner Software for Macintosh" on
page 3-22 for details.
For PC users:
Unless your PC already has a SCSI board installed, you need to
install one, along with SCSI driver software. Install the SCSI board
according to the directions included with it.
If your PC has a SCSI board up and running, connect the scanner
as described in the next section.
Note:
You will need to install the SCSI driver that is normally included with
Windows 2000, 98, 95, or NT (see your system documentation for
instructions), or the driver described in the SCSI board installation
documentation.
For Macintosh users:
Your Macintosh may or may not have SCSI ports, depending on
which model you own. If you have a Macintosh that does not have
a SCSI port, you need to install a SCSI board and driver. Follow
the directions below to connect your scanner and computer.
Note:
The latest driver may be available for download from the Web site of the
SCSI board manufacturer.
2-6
Setting Up the Scanner