Epson EXPRESSION 1640XL User Manual page 33

2. Connect one end of the interface cable to one of the scanner
SCSI connectors until the locks on both sides snap in.
Note:
To connect the scanner to a PC or any other SCSI device, the
total length of cable in the daisy chain must not exceed 3 meters;
otherwise the system may not work properly.
Make sure no other interface is used.
3. Connect the other end of the cable to the SCSI port of your
computer or another SCSI device.
Note:
The SCSI port on the Macintosh is the larger port with the SCSI
icon over it.
4. Plug in the power cords of your computer, scanner, and other
external SCSI devices.
Note:
Before turning on your system, be sure to read "Power-on sequence"
following.
Setting Up the Scanner
2
2-11