Epson EXPRESSION 1640XL User Manual page 114

1. Select your scanner from the installed scanners and cameras
list in the Scanners and Cameras Properties dialog box.
Click Properties, and then click the Events tab.
2. You can see the Start Button is listed as a scanner event. Make
sure the check box of the application you want to assign to the
=
Start button is selected and all other application check
boxes are clear in the Send to this application list.
Note:
If more than one application is selected, a dialog box appears
prompting you to select an application when the Start button
is pressed.
Some applications do not support linkage to scanners and
digital cameras. Linkage is available only with applications that
appear in the Send to this application list.
3. Close the dialog box by clicking the OK button.
5-14
Using the Start Button