Setting The Scsi Id Number - Epson EXPRESSION 1640XL User Manual

Setting the SCSI ID number

The scanner's default SCSI ID number is 2.
The SCSI ID rotary switch
is located at the back of
the scanner.
If you add the scanner to a system in which one of your SCSI
devices already has a SCSI ID of 2, change the ID number to an
unused number using the rotary switch. See the table below as a
guide.
ID Availability
Not available for Macintosh
0
Not recommended for
Windows
1 Not recommended
2
3
4
5
6
Not available for Macintosh
7
May not be available for
Windows
2-8
Setting Up the Scanner
Description
Used for hard disk
Usually used for hard disk
Usually used for hard disk
Factory setting of the scanner
Not available if your Macintosh
has a built-in CD-ROM
Always used for the Macintosh
itself
Usually used for the SCSI board