Loudspeaker Volume; Connecting A Telephone Answering Machine - BT PAPERJET 45 User Manual

40 Additional settings
For the fax machine:
1. Press or the current setting is displayed for a few seconds.
2. Press or again to change the volume.

Loudspeaker volume

You can adjust the loudspeaker volume, on your BT PaperJet 45.
1. Press then or
2. Press to confirm.
DECT handset volume
1. You can adjust the volume heard in the earpiece by pressing the
on the handset during a call

Connecting a telephone answering machine

If you want to use a telephone answering machine with your
BT PaperJet 45 it is recommended that you connect it to the same
socket (see page 9).
To enable the telephone answering machine to answer incoming calls you
must set the number of rings on your BT PaperJet 45 to two or more
than the number of rings set on the telephone answering machine.
A typical setup would be:
Telephone answering machine – 2 rings.
Fax rings – 4 rings.
Total rings – 4 rings.
(Also see page 21 for information about Fax and Total rings.)
It is recommended that you keep outgoing messages on the telephone
answering machine to less that 10 seconds in duration.
to lower or raise the volume.
or