Setting The Hot Water Temperature; Fig. 15 Setting Brewer Stop 2; Fig. 16 Temperature Setting - BRAVILOR BONAMAT FRESHONE Operating Instructions Manual

Fig. 15 Setting brewer stop 2

D Set with the setting key (5.6 or 5.8) the number
of seconds for [S2].
TIP
– Write your own settings with a pencil in the
table.
D Press the programming key (19.4) to finish the
programming.
Brewerstops Factory setting
S1 1.5 s
S2 0.5 s
Table 3 Brewer stops
WARNING
n When the setting of [S1] is too high, this can
lead to over–extraction, which will give the
coffee a bitter taste.
16
version 1.0
6.2.5
D Press the programming key (19.4) to start the
programming.
D Press three times the [Enter] key (5.7).

Fig. 16 Temperature setting

D Set with the setting key (5.6 or 5.8) the
temperature.
Set by you
. . . s TIP
. . . s
– By pressing the key (5.6 or 5.8) longer you
quickly go through the range.
D Press the programming key (19.4) to finish the
programming.
The automatic setting of the machine is 4_C
under the boiling point. This temperature
delivers a maximum coffee extract giving an
optimum flavour.
Setting the hot water
temperature
ECopyright Bravilor Bonamat B.V.