Table of Contents
Advertisement
Pin25-40: USB0/USB1/USB2/USB3, Front USB connector, it provides 4 USB ports
Note:
When connecting LEDs and buzzer and GPIO and USB, pay special attention to the
signal polarity. Make sure that the connector pins have a one-to-one correspondence
with chassis wiring, or it may cause boot up failure.
34. JCF/JSATA:
(2.0mm Pitch 3x4 Pin Header), it provides selectable IDE_CF1 or SATA4 signal output
control.
35. SATA_P1/SATA_P2:
(2.5mm Pitch 1x2 box Pin Header), Two onboard 5V output connectors are reserved to
provide power for SATA devices.
Note:
Output current of the connector must not be above 1A.
APC-3X17B User Manual
PS/2 keyboard and mouse via a dedicated cable for direct used.
via a dedicated USB cable, speed up to 480Mb/s.
Functio
n
SATA
4
(Default
)
IDE_CF
1
(option)
Pin#
1
2
Jumper setting
Signal
Name
+DC5V
Ground
29
Advertisement
Table of Contents
