Switching Off - Becker READY 50 Operating Manual

> Press the button for the required
language.
> The selection is confirmed by pressing
OK
.
> Then select the desired voice.
Note: for models with TTS
Voices with a (TTS) tag support the text-
to-speech function (e.g. announcing
roads and reading out text messages).
A short example announcement is given.
> Confirm your selection by pressing the
OK
button.
The following prompt appears shortly
afterwards:
> If you agree to the request contained in
this prompt, press the OK
Note:
Use of the Navigation device is only
permitted in accordance with the
national road traffic
applicable at the time.

Switching off

You can switch the unit off at any time.
button.
> Press the button on the top of the
Navigation device.
The Navigation device switches to sleep
mode.
> To switch off the Navigation device
regulations
completely, set the On/Off switch on
the underside of the unit to O.
Note:
We recommend that you place the
Navigation device in sleep mode in the
event of short interruptions to operation
(of up to a week).
This significantly reduces the switch-on
time and the Navigation device finds the
satellites required for navigation much
faster.
If route guidance was active when sleep
mode is activated, it is automatically
resumed if the Navigation device is
switched back on again within approx. 4
hours.
GENERAL OPERATION
25
>>>
> D
> GB
> F
> I
> PL