Transferring Pictures; Faults - Becker READY 50 Operating Manual

• Click on No to start the Content
Manager with the version already
installed.
• If the new version is a critical update,
the Exit button will be shown instead of
the No button. You must install the
new version, otherwise you have to
exit the application.
If you have not yet made a backup of the
navigation unit, the Content Manager will
ask you each time it starts whether you
would like to make a complete or partial
backup copy.
Note:
We recommend that you always create
the backup. Otherwise you will not be
able to restore the content in the event
of loss of data.

Transferring pictures

Images*, music* and videos* can be
stored on a separate Micro SD memory
card (not included in the scope of
delivery) or in the internal memory of the
Navigation device in the "Media" folder.
Files can be transferred via a card reader
or a USB connection.
Note:
We recommend that you give files and
directories self-explanatory names so
that it is simpler to find these again, if
needed.
*depending on model, must be activated via the Content Manager
GENERAL OPERATION

Faults

Malfunctions in the operating system or
in the unit are displayed accordingly. If
the function you want cannot then be
executed, you should restart the
Navigation device using the On/Off
switch.
If the messages reappear or the unit
doesnot function correctly for any other
reason, please contact your local dealer.
You can also try to find a solution to
your problem in the FAQ in the Support
area on the Becker
(www.mybecker.com).
Note:
Never attempt to open the unit yourself.
Please contact your authorised dealer if
you are unable to remedy the fault.
>>>
> D
> GB
> F
> I
> PL
homepage
33