Route Planning - Becker READY 50 Operating Manual

Route planning

The route planning menu allows you to
create and select individual routes. To do
this, enter the individual destination
points for the desired route. It is then
possible to travel to these points
consecutively without having to enter
any further information. You can also
optimise the destination points entered
and in so doing change their order.
> In the main menu, press the button
New destination .
> Press the
Route planning
button.
In the route menu you can create a new
route by pressing the Create new route
button. Previously stored routes are
shown in a list below this.
Note:
If no routes have yet been stored, the
route menu is empty.
Scrolling through stored routes
> Press the arrow keys
use the scroll wheel on the right of the
screen to scroll through the stored
routes.
Editing stored routes
You can add additional stages to a stored
route, change the name of the route or
delete it.
> Press the
button in front of the
route you wish to edit.
NAVIGATION MODE
By pressing Add stage you can now add a
stage to the route.
Rename route
After pressing
give the route a new name.
Delete route
Pressing
delete the route from the stored routes.
Selecting and starting a route
> Press a route to select it.
The route is loaded and displayed in the
stage menu.
or
> Press the top button.
Note:
You can also select a leg of the route.
The route is started as of this leg.
>>>
> D
you can
> GB
will allow you to
> F
> I
> PL
55