Problems With Wirelesshd (Eh-Tw6100W Only) - Epson EH-TW6100W User Manual

Troubleshooting
Check
Was a new device connected, or was the con-
nection changed?
Are many multi-media players connected?
The device name is not displayed under Device Connections
Check
Does the connected device meet the HDMI
CEC standards?

Problems with WirelessHD (EH-TW6100W only)

Cannot project WirelessHD images
Check
Does the cable connecting the supplied Wire-
lessHD Transmitter meet the HDMI stand-
ards?
Is WirelessHD set to Off?
Are signals being received within the Wire-
lessHD transmission range?
Is the supplied WirelessHD Transmitter
turned on?
Is the Link indicator for the supplied Wire-
lessHD Transmitter off?
Are the indicators of the supplied WirelessHD
Transmitter flashing alternately?
Are the projector and the WirelessHD Trans-
mitter facing the correct way?
WirelessHD audio is not output correctly
Check
Is audio output when the WirelessHD is con-
nected?
If the CEC function for a connected device needs to be set again,
for example when a new device is connected or the connection
is changed, you may need to restart the device.
Up to 3 multi-media players that meet the HDMI CEC standards
can be connected at the same time.
If the connected device does not meet the HDMI CEC standards,
it is not displayed. See the documentation and so on supplied
with the connected device for more information.
If the cable does not meet the HDMI standards, operations are
not possible.
When WirelessHD is set to Off from the configuration menu,
projection is not possible for WirelessHD input signals. Set Wire-
lessHD to On, and then press the
WirelessHD p.71
Check the range within which the WirelessHD's transceiver can
communicate, and view within that range.
Check the power lamp on the WirelessHD Transmitter. If there is
no power being supplied, make sure the connector for the AC
adapter is securely connected, and then turn on the power
switch.
No AV device is connected. Check that the HDMI cable is securely
connected.
A temperature warning has occurred. Operations are stopped if
there is not enough ventilation, such as when the device is placed
on an audio rack, or if it is being used in a room with a high
ambient temperature. Wait until it has cooled down, and then
try again.
Setup the projector and the WirelessHD Transmitter so that they
are facing each other.
Set the connected equipment to PCM output.
86
Remedy
Remedy
Remedy
button.
s
p.54
s
Remedy
Settings -