Problems With Wirelesshd (Eh-Tw9200W/Eh-Tw8200W Only) - Epson EH-TW9200W User Manual

Troubleshooting
Check
Does the connected device meet the HDMI
CEC standards?
Are the cables connected correctly?
Is the power for the amplifier or DVD recorder
and so on turned on?
Was a new device connected, or was the con‐
nection changed?
Are many multi-media players connected?
The device name is not displayed under Device Connections
Check
Does the connected device meet the HDMI
CEC standards?

Problems with WirelessHD (EH-TW9200W/EH-TW8200W only)

Cannot project WirelessHD images
Check
Does the cable connecting the supplied Wire‐
lessHD Transmitter meet the HDMI stand‐
ards?
Is WirelessHD set to Off?
Are signals being received within the Wire‐
lessHD transmission range?
Is the supplied WirelessHD Transmitter
turned on?
Is the WirelessHD indicator for the supplied
WirelessHD Transmitter off?
Is the Link indicator for the supplied Wire‐
lessHD Transmitter off?
If the connected device does not meet the HDMI CEC standards,
it cannot be operated even if it is connected to the HDMI port.
See the documentation and so on supplied with the connected
device for more information.
Also, press the button, and then check if the device is
available under Device Connections.
Check that all the cables required to use HDMI Link are securely
connected. p.61
s
Put each device in standby status. See the documentation and
so on supplied with the connected device for more information.
If the CEC function for a connected device needs to be set again,
for example when a new device is connected or the connection
is changed, you may need to restart the device.
Up to 3 multi-media players that meet the HDMI CEC standards
can be connected at the same time.
If the connected device does not meet the HDMI CEC standards,
it is not displayed. See the documentation and so on supplied
with the connected device for more information.
If the cable does not meet the HDMI standards, operations are
not possible.
When WirelessHD is set to Off from the Configuration menu,
projection is not possible for WirelessHD input signals. Set Wire‐
lessHD to On, and then press the
WirelessHD p.70
Check the range within which the WirelessHD's transceiver can
communicate, and view within that range.
Check the power lamp on the WirelessHD Transmitter. If there is
no power being supplied, make sure the connector for the AC
adapter is securely connected, and then turn on the power
switch.
The WirelessHD cannot communicate with the projector. Check
the range within which the WirelessHD's transceiver can com‐
municate, and setup within that range.
No signal is output from the AV device connected to the Wire‐
lessHD Transmitter. Check that the cables from the AV device and
the WirelessHD Transmitter are securely connected.
87
Remedy
p.61
s
Remedy
Remedy
button.
s
p.56
s
Settings -