Projecting Images - Epson EH-TW6100W User Manual

Useful Functions

Projecting Images

a
Start playback on the AV device, and then turn on the projector and the WirelessHD
Transmitter.
The indicator on the WirelessHD Transmitter turns on.
t
b
Check the status of the WiHD indicator on the WirelessHD Transmitter.
If the WiHD indicator is on, go to the next step.
If the indicator is off, press the
Make sure you point the remote control at the WirelessHD Transmitter when using the
on the remote control.
c
Check the status of the Link indicator on the WirelessHD Transmitter.
If the WirelessHD Transmitter is connected to the projector, the Link indicator flashes and then remains
on.
c
If the indicator continues to flash slowly, the WirelessHD Transmitter cannot connect to the
projector and has entered standby status. Make sure the projector has been setup correctly,
such as turning on the power and so on.
button on the remote control or the WirelessHD Transmitter.
Remote control
52
button
WirelessHD Transmit-
ter