Part Names And Functions; Front/Top - Epson EH-TW6100W User Manual

Introduction

Part Names and Functions

Front/Top

Name
a Lamp cover
b Air exhaust vent
c Remote receiver
d Projector's lens
e Lens cover
f Air intake vent
g Front adjustable foot
h Air filter cover
i Focus ring
j Zoom ring
k H-Keystone slider
l Control panel
Open when replacing the projector's lamp.
Exhaust vent for air used to cool the projector internally.
Caution
While projecting, do not put your face or hands near the air exhaust vent,
and do not place objects that may become warped or damaged by heat near
the vent. Hot air from the air exhaust vent could cause burns, warping, or
accidents to occur.
Receives signals from the remote control.
Images are projected from here.
Install when not using the projector to protect the lens from being scratched or
soiled. p.22
s
Intake vent for air used to cool the projector internally.
When setup on a surface such as a table, extend the foot to adjust the horizontal
tilt. p.26
s
When cleaning or replacing the air filter, open this cover and remove the air filter.
p.88, p.91
s
Adjusts the image focus.
Adjusts the image size.
s
Performs horizontal keystone correction.
Control panel on the projector.
Function
p.92
s
p.21
s
p.25
s
p.25
p.26
s
p.9
s
8