Basic Operations
Starting and Ending Projection
Turning on the Projector and Projecting
a
Connect the power cable.
Connect using the power cable supplied.
b
Remove the lens cover.
c
Turn on the connected equipment.
c
•
This projector provides a Child Lock function to prevent children from accidentally turning the power
on and a Control Panel Lock function to prevent accidental operations and so on.
Lock/Control Panel Lock
•
When using at an altitude of 1500 m or more, set High Altitude Mode to On.
High Altitude Mode
•
This projector provides an Auto Setup function to automatically select the optimum settings when the
input signal for the connected computer image changes.
•
Do not attach the lens cover during projection.
•
If the projector is suspended from a ceiling, after removing the lens cap, make sure you keep it in a safe
place as you will need to attach it when transporting the projector.
p.71
p.73
22
d
Turn the power on.
Remote control
c
When Direct Power On is set to
On, you can start projecting by
simply connecting the power
cable to the projector without
having to press any buttons.
Extended - Operation - Direct
s
Power On
Warning
Do not look into the lens during projection.
s
Signal - Auto Setup
s
Control panel
p.73
Settings - Child
s
Extended - Operation -
p.68