Connecting With Wirelesshd (Eh- Tw9300W/Eh-Tw8300W Only); Installing The Wirelesshd Transmitter - Epson EH-TW9300W User Manual

Table of Contents

Useful Functions

Connecting with WirelessHD (EH-TW9300W/

EH-TW8300W Only)

You can use the supplied WirelessHD Transmitter to wirelessly receive image and sound data.

This is useful when the projector cannot be setup near your AV devices as you can connect the devices to the

projector without using cables.

You can use the WirelessHD Transmitter in the following ways.

• You can connect up to four AV devices at the same time, and switch images using the remote control.

• As well as the projector, you can connect another monitor device, such as a television, to the HDMI Out port, and

then switch the output using the remote control.

• This allows other monitor devices such as TVs connected to the HDMI Out port to project images from the connected

AV device, even if the projector is off.

• You can connect smart devices and tablets that support MHL, and then project images from the connected MHL

device. You can also operate MHL devices from the projector's remote control, as well as charge the MHL device.

• You can split the HDMI signal that is being input into the WirelessHD Transmitter into image and audio, and output

to other devices.

• Even for AV devices that do not support HDCP 2.2, you can output audio by connecting to the HDMI Out port on the

WirelessHD Transmitter.

Table of Contents

Eh-tw9300 Eh-tw8300w Eh-tw8300 Eh-tw7300