Adjusting The Volume; Hiding The Image And Muting The Audio Temporarily - Epson EH-TW6100W User Manual

Basic Operations

Adjusting the Volume

You can adjust the volume by using the
the projector's control panel.
Remote control
c
•
You can also adjust the volume from the configuration menu.
•
Under normal conditions, you can adjust the volume of the projector's built-in speaker. However, by
connecting an AV system to the projector and setting HDMI Link to On and Audio Out Device to AV
System, you can adjust the AV system's volume when projecting from HDMI1, HDMI2, and
WirelessHD sources.
Caution
Do not start at high volume.
A sudden excessive volume may cause loss of hearing. Always lower the volume before powering off, so
that you can gradually increase the volume when you next turn on the power.

Hiding the Image and Muting the Audio Temporarily

You can use this to temporarily hide the image on the screen and mute the audio.
Press the button to show or hide the image. The audio is also muted or played.
EH-TW6100W
c
•
For movies, because the movie continues to play even when it is hidden, you cannot return to the point
at which you hid the image and muted the audio using the
•
The button also switches between muting and playing the audio.
•
Under normal conditions, you can adjust the audio of the projector's built-in speaker. However, by
connecting an AV system to the projector and setting HDMI Link to On and Audio Out Device to AV
System, you can adjust the AV system's audio when projecting from HDMI1, HDMI2, and
WirelessHD sources.
buttons on the remote control or the
p.59
s
p.59
s
28
Control panel
Settings - Audio p.71
s
EH-TW6100/EH-TW5950
button.
buttons on