Info Menu; Reset Menu - Epson EH-TW6100W User Manual

Configuration Menu

Info menu

Function
Lamp Hours
Source
Input Signal
Resolution
Scan Mode
Refresh Rate
3D Format
Sync Info
Deep Color
Video Signal
Status
Serial Number

Reset menu

Function
Reset All
Reset Memory
Reset Lamp Hours
Displays the cumulative lamp operating time.
Displays the source name for the connected equipment currently being projec-
ted.
Displays the content of Input Signal set in the Signal menu according to the
source.
Displays the resolution.
Displays the scan mode.
Displays the refresh rate.
Displays the 3D format of the signal input during 3D projection (Frame Packing,
Side by Side, or Top and Bottom).
Displays the image signal information.
This information may be needed if service is required.
Displays deep color.
Displays the settings for Video Signal in the Signal menu.
This is information about errors that have occurred on the projector.
This information may be needed if service is required.
Displays the projector's serial number.
Resets all items in the configuration menu to their default settings.
The following items are not reset to their defaults: Input Signal, Save Memo-
ry, Lamp Hours, Language, User Button.
Erases all settings saved using the Save Memory function.
Resets the cumulative lamp hours use time to 0 H. Reset when you replace the
lamp.
75
Explanation
Explanation